Netgear EX2700 Setup

The Netgear EX2700 N300 Setup , Basic Edition is a little device that extends the range of your WiFi network to the farthest corners of your home or workplace. It has a maximum speed of 750mbps. The extension includes two antennas on each side for improved performance. Look no farther than this site for detailed instructions on how to set up a Netgear EX2700 router.

Follow the steps below to set up your Netgear EX2700:

  • Start your EX2700 extender.
  • Keep your N300 close to your wifi router.
  • Visit
  • To continue, follow all of the on-screen directions.
  • Once completed, relocate your EX2700 to a new desired position.
  • You may now link additional smart devices to the network.
  • This is not the only way to configure your EX2700 wifi range extender; in the next section, we will go through how to set up your Netgear extender using WPS
netgear ex2700 setup

Netgear EX2700: WPS Setup

netgear ex2700 setup

Have you ever heard of WPS (WiFi Protected Setup)? If not, let us continue with this procedure. In this essay, we will show you how to configure your Netgear EX2700 in 2-3 minutes using WPS.To configure your Netgear EX2700 N300 for WPS, follow the instructions below:

  • After unwrapping your Netgear EX2700, turn it on.
  • Put your N300 beside your primary router.
  • On the extender, click the WPS button.
  • Wait a minute before pressing the WPS button on the router.
  • Wait a moment for the router LED to turn solid green before contacting our technical support.
  • When you see a solid green light, it implies your setup is complete.
  • Transfer your N300 to a different location.
  • You may now connect any wifi-enabled smart device, such as a smartphone, desktop, laptop, or tablet.


Note: If you continue to have problems with the setup procedure, please contact us via our toll-free lines or live chat.

Netgear EX2700 | Firmware update

Are you having problems with your EX2700 after completing the setup, or has your N300 begun acting strangely or not providing the right speed? Then you must upgrade your firmware to the most recent version. The Netgear EX2700 firmware upgrade includes additional security features as well as other key improvements that will make your extender run more efficiently.

Here are the steps to updating the firmware on your Netgear EX2700:


  • On your devices, install the firmware.
  • Navigate to
  • Access your Netgear EX2700.
  • Select the Firmware update button.
  • Navigate to the Upload update file and then click Browse.
  • Press the UPLOAD button.
  • Do not disconnect the EX2700 extender until the upgrade is complete.
  • When the update is complete, the N300 extender will reboot automatically.
netgear ex2700 N300 setup

How to reset Netgear EX2700?

Do you wish to factory reset your Netgear EX2700? When the user is unable to recall the admin password, the factory reset process is usually conducted. This process will ready your extension for a fresh installation. Keep in mind that a factory reset will destroy your unique settings like your login, password, SSID, and so on.

netgear ex2700 N300 setup

Here are the steps to reset Netgear EX2700 :


  • Connect your Netgear EX2700 and power it on.
  • Wait until it displays a steady solid green light.
  • Find the location of the factory reset button
  • It could be provided on the extender’s side.
  • Pick up a pencil or a sharp pin.
  • Insert the pin  into the hole and keep it there for 14-15  seconds.
  • Wait for the power light to turn solid green before removing the paper clip.

Note: If you continue to experience problems with the factory reset process, please contact us using our toll-free lines or live chat.

Troubleshooting steps

Use the troubleshooting procedures indicated below to address Netgear N300 EX2700 configuration issues:


  • Check to see if the Netgear EX2700 extender is getting enough power from the wall socket.
  • Examine the wall plug into which the extender is inserted to see whether it is broken or short-circuited.
  • Attach your device to a high-speed internet access.
  • Check that all electrical connections are in excellent working condition. Any broken wire should be avoided at all costs.
  • Keep your extender away from walls, area corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, metal objects, aluminium studs, and other possible interfering sources.
  • If you’re experiencing problems visiting, double-check that you’ve entered the correct URL in the address area.
  • Start your N300 extender and attempt setting up your Netgear EX2700 extender again.
  • Only use the most current edition of your internet browser while logging onto
  • Update your extender’s Netgear firmware to the latest recent version.
  • Reset the addon to its factory default settings.


Note: If you require assistance, please contact us at our toll-free lines or by live chat. We are always there to assist you.